HyLyte is a leading distributor and manufacturer of standard safety signs and safety products suitable for all areas of industry. Ph 1300 858 951 e: info@hylyte.com.au or visit www.hylyte.com.au
Tuesday, November 3, 2009
Wednesday, October 14, 2009
Rubber Wheel Stops
WHEEL STOPS – RUBBERWheel Stops are ideal for effective delineation of parking and for use in the protection of walls, vehicles and other valuables in all garages and surfaces parking applications
· Manufactured from 100% recycled tyres.
· Lightweight easy to handle and can be installed by one person.
· Yellow reflectors for increased visibility.
· Approximately 1/5th the weight of concrete.
· Resistant to UV, moisture, oil and extreme temperature variations.
· Flexible. Allowing for conformity to contour to virtually any road surface.
Installation
Easy to install, can be installed by one person, with polyurethane adhesive or
35cm Rebar Spikes.
Warranty
Wheel Stops carry a 1 year Manufacturers Warranty when item has been determined to be defective. All other installation related problems are assumed to be the fault of improper Conditions or installation error.
for more information go to www.hylyte.com
Blogged with the Flock Browser
Labels:
Flushlyte,
IdentificationSystem,
NumberingSystem,
SignSystems
Monday, October 12, 2009
FLUSHLYTE
Flushlyte Address - Numbering – Sign System
The FlushLyte, a Black Powder coated Aluminium extrusion with a reflective 3M tape applied to it in a choice of Safety Yellow or White
From this tape we stamp out the Letters, Numbers or Chevron Arrows that are required to complete the sign up to a maximum length of 3.7 metres. The finished product is then over sprayed with a clear two pack polyurethane to seal the tape and prevent the peeling back of the tape by curious fingers. This process gives an anti graffiti quality to the sign as any paint can be removed by applying Paint Thinners to the surface without damaging the FlushLyte
In the Street Addressing application it is fixed to the Kerb with Sure Drive fasteners. These are difficult to remove and would require the use of a coal chisel to achieve theft.
Some Applications for the use of the FlushLyte Signage System.
Kerb Mounted Applications
- House Numbering
- Street Name Signs
- Fire Hydrant Markers
- Directional Markers- Chevrons i.e. Roundabouts, Traffic Islands etc.
- No Parking - Reserved Parking - Customer Parking
- Motor vehicle rego plate identification at parking spots.
- Bus Stop (either Vertical or Horizontal)
- Toilets Male – Female
- Taxi Stand
Currently the FlushLyte is being trialed by the Gold Coast City Council as a alternate Kerb mounted Street sign for those signs that are stolen on a regular basis This gives the community a reference while the stolen sign is being replaced
They are also using the FlushLyte as Road Delineation with Chevrons at Roundabouts and Traffic Islands.
for more information go to : www.hylyte.com.au
Labels:
Flushlyte,
IdentificationSystem,
NumberingSystem,
SignSystems
CONVEX MIRROR
Used as an aid to safety, as a security device, or a traffic mirror, a Convex Mirror will protect property and people effectively and economically.
Convex Mirrors are available for indoor use, indoor/outdoor, or traffic control, and are supplied with fittings for wall mounting or pole mounting and come in the following sizes:-
- 300mm Diameter
- 450mm Diameter
- 600mm Diameter
- 760mm Diameter
Features and Benefits of Convex Mirrors :-
- Impact resistant, long life
- Simple fixing in minutes
- Easy adjustment at any time
- No maintenance required
- Single outlay, long term benefit.
How to Determine which Convex Mirror to Select :-
The size of the Convex Mirror required depends on the distance and quality of the
image you need. See Chart below for distances.
This chart is to be used as a guide only :-
Diameter Distance300mm to 6m
450mm to 8m
600mm to 12m
760mm over 12m
All Convex Mirrors post mounted or wall mounted, are supplied with brackets to suit
the application.
Installation:
Post Mounted, use 50nb post (62mm diam)
attach bracket to post with the 4 bolts and nuts supplied
place the mirror into the bracket tighten the nuts having
ascertained that the mirror is in the correct position to
give the required visibility from both directions.
Wall Mounted, hold the mirror against the wall to determine the
best position to attach the mounting bracket to achieve the desired
visibility from both directions, then mount the bracket to the wall
at that position with suitable fixings for the substrata.
Place the mirror into the bracket tighten the nuts having Ascertained
that the mirror is in the correct position to give the required visibility
from both directions.
Warranty:
All mirrors carry a 1 year Manufacturers Warranty when item has been determined to be
defective. All other installation related problems are assumed to be the fault of
improper Conditions or installation error.
For more information go to www.hylyte.com.au
Blogged with the Flock Browser
Friday, October 9, 2009
HyLyte is a leading distributor and manufacturer of standard safety signs and safety products suitable for all areas of industry.
We offer a range of safety signs, safety products, traffic control equipment, traffic signs and custom signage for use by safety conscience organisations.
Specialised areas include Retro Reflective Identification Systems and Roadside Delineation servicing local government, main roads, councils and guardrail installers.
HyLyte is committed to supplying professional quailty products that are guaranteed, and we endeavour to develop signs, graphics, products and solutions that are practical, safety focused, cost effective and to exacting standards to our client.
Go to www.hylyte.com.au
Subscribe to:
Posts (Atom)






