Rubber Wheel Stops

WHEEL STOPS – RUBBER
Wheel Stops are ideal for effective delineation of parking and for use in the protection of walls, vehicles and other valuables in all garages and surfaces parking applications

·            Manufactured from 100% recycled tyres. 

·            Lightweight easy to handle and can be installed by one person.

·            Yellow reflectors for increased visibility.

·            Approximately 1/5^th the weight of concrete.

·            Resistant to UV, moisture, oil and extreme temperature variations.

·            Flexible. Allowing  for conformity to contour to virtually any road  surface.

  

Installation

Easy to install, can be installed by one person, with polyurethane adhesive or

35cm  Rebar Spikes.

Warranty

Wheel Stops carry a 1 year Manufacturers Warranty when item has been determined to be defective.  All other installation related problems are assumed to be the fault of improper Conditions or installation error.

for more information go to www.hylyte.com

Blogged with the Flock Browser

FLUSHLYTE

Flushlyte Address - Numbering – Sign System


The FlushLyte, a Black Powder coated Aluminium extrusion with a reflective 3M tape applied to it in a choice of Safety Yellow or White


From this tape we stamp out the Letters, Numbers or Chevron Arrows that are required to complete the sign up to a maximum length of 3.7 metres. The finished product is then over sprayed with a clear two pack polyurethane to seal the tape and prevent the peeling back of the tape by curious fingers. This process gives an anti graffiti quality to the sign as any paint can be removed by applying Paint Thinners to the surface without damaging the FlushLyte


In the Street Addressing application it is fixed to the Kerb with Sure Drive fasteners. These are difficult to remove and would require the use of a coal chisel to achieve theft.


Some Applications for the use of the FlushLyte Signage System.


Kerb Mounted Applications

•   House Numbering

•   Street Name Signs

•   Fire Hydrant Markers

•   Directional Markers- Chevrons i.e. Roundabouts, Traffic Islands etc.

•   No Parking  - Reserved Parking - Customer Parking

•   Motor vehicle rego plate identification at parking spots.

Wall Mounted Applications

•   Bus Stop  (either Vertical or Horizontal)

•   Toilets Male – Female

•   Taxi Stand

The application of the FlushLyte is only limited by your imagination. It is highly visible in daylight as well as being retro-reflective in situations when light hits it at night.

Currently the FlushLyte is being trialed by the Gold Coast City Council as a alternate Kerb mounted Street sign for those signs that are stolen on a regular basis This gives the community a reference while the stolen sign is being replaced


They are also using the FlushLyte as Road Delineation with Chevrons at Roundabouts and Traffic Islands.


for more information go to : www.hylyte.com.au

CONVEX MIRROR

Convex Mirror

Used as an aid to safety, as a security device, or a traffic mirror, a Convex Mirror will protect property and people effectively and economically.


Convex Mirrors are available for indoor use, indoor/outdoor, or traffic control, and are supplied with fittings for wall mounting or pole mounting and come  in the following sizes:-

•                           300mm            Diameter
•                           450mm            Diameter
•                           600mm            Diameter
•                           760mm            Diameter

Features and Benefits of Convex Mirrors :-

• Impact resistant, long life
• Simple fixing in minutes
• Easy adjustment at any time
• No maintenance required
• Single outlay, long term benefit.

How to Determine which Convex Mirror to Select :-


The size of the Convex Mirror required depends on the distance and quality of the
image you need.  See Chart below for distances.

This chart is to be used as a guide only :-

                Diameter                                  Distance
                  300mm                                    to      6m
                  450mm                                    to      8m
                  600mm                                    to    12m
                  760mm                                  over   12m


All Convex Mirrors post mounted or wall mounted, are supplied with brackets to suit
the application.


Installation:
            Post Mounted, use 50nb post (62mm diam)
            attach bracket to post with the 4 bolts and nuts supplied
            place the mirror into the bracket tighten the nuts having
            ascertained that the mirror is in the correct position to
            give the required visibility from both directions.


            Wall Mounted, hold the mirror against the wall to determine the
            best position to attach the mounting bracket to achieve the desired
            visibility from both directions, then mount the bracket to the wall
            at that position with suitable fixings for the substrata.
            Place the mirror into the bracket tighten the nuts having Ascertained
            that the mirror is in the correct position to give the required visibility
            from both directions.


Warranty:
All mirrors carry a 1 year Manufacturers Warranty when item has been determined to be
defective.  All other installation related problems are assumed to be the fault of
improper Conditions or installation error.


For more information go to  www.hylyte.com.au

Blogged with the Flock Browser

HyLyte is a leading distributor and manufacturer of standard safety signs and safety products suitable for all areas of industry.
We offer a range of safety signs, safety products, traffic control equipment, traffic signs and custom signage for use by safety conscience organisations.
Specialised areas include Retro Reflective Identification Systems and Roadside Delineation servicing local government, main roads, councils and guardrail installers.
HyLyte is committed to supplying professional quailty products that are guaranteed, and we endeavour to develop signs, graphics, products and solutions that are practical, safety focused, cost effective and to exacting standards to our client.

Go to www.hylyte.com.au